7
5.7 Effect/Special
1) D-Effect (Digital Effect):
Select digital Flip/Rotate state (Off / Rotation / Mirror / V Flip)
2) Nega:
Select negative colour state (on/off)
3) D-PTZ (Digital Pan, Tilt, Zoom):
Adjust d-PTZ
• Func: Press the Enter button to turn digital zoom on/off.
• Zoom: Use the Left and Right buttons adjust to digital zoom (0-55).
• Pan&Tilt: Press the Enter button to access the Pan&Tilt.
Use the Left and Right buttons adjust to digital pan
Use the Up and Down buttons adjust to digital tilt
Press the Enter button to exit.
• PT Reset (Pan & Tilt Reset): Press the Enter button to reset digital pan and tilt.
4) Freeze:
Select the still mode on/off
5) Frame Control:
Select term of refresh rate for output video. This function is useful to reduce the recording to
data storage.
• Func: Select frame control mode to ON/OFF, and Auto.
Auto mode: When motion is not detected, output video is being refresh in configured interval.
And when the motion is detected, output video is switched to real time video.
ON: Always refresh in configured interval
OFF: Always real time video
• Renewal (sec): Select an interval between two frame.
NOTE: When object start moving, The output video possible to cut a little time.
6) ScnChg/Unfoc:
Select scene change / unfocus detection On/Off .
• Inform that whether scene have been changed or not. Detect breaking or changing in the watching scene
(Spray, Screen Camera, Changing Scene…)
• This function is linked with alarm out
NOTE: In low luminance environment, the accuracy is down of the result.
In very low luminance environment, operation is not be performed.
When moving object is exist, operation is not be performed.
5.8 System Setup
1) Cam Info:
Camera basic information display
Cam ID / Baud rate / Protocol / Firmware Ver. / CCD Type / Lens Type
2) General Setup
• System Lock: Configuration Lock
When system lock is set to „Lock”, User must to input 4-character password to enter OSD menu.
NOTE: Default password is „0000”.
• Change PID: Change the administrator’s password
Move cursor with OSD Key and Press Enter to input the character.
