Eneo TVD-2080Z03IR, User Manual

Page: 22 / 32

Operating Instructions
22
FULL-HD AF ZOOM CAMERA
• OFF : Normal display without mirroring or flipping
• Hor. : Video is reversed left and right
• Ver. : Video is reversed upside down
• HV : Video is reversed left and right and upside down
When the video is reversed by Ver. or HV, then the joystick directions are
reversed accordingly.
This feature is very useful when a camera in installed in upside dawn.
: Reverses the video left and right and/or up and down by MIRROR/FLIP.
7-1. MIRROR/FLIP
(default: OFF)
• PRIVACY ALL: ON enables all Privacy Zones you set.
• ZONE NUM : Set a number to select a privacy zone from 1~10.
• ZONE DISP : ON enables to display relevant privacy zone
• H-POS, V-POS, H-SIZE and V-SIZE : Adjust the size and position of zone.
• COLOR : Select the color used for masking the zone form eight colors.
• TRANSPARENCY : Defines the transparency for the mask zone.
: 10 Privacy zones which can be enabled individually by ZONE DISP are
available to mask the video.
7-2. PRIVACY
• STAY ZOOMING : Sets the duration time for zooming by Motion.
(See page No.27 “SMART MOTION ZOOM”)
: MOTION can detect the changes in the motion window and displays the results
in blocks and/or a text message.
7-3. MOTION
(default: OFF)
※
SMART MOTION ZOOM doesn’t work at low light condition and BW.
• SENSITIVITY : Adjusts the detection sensitivity for motion.
High value increases the sensitivity to detect the small motion easily. Too low
sensitivity will cause the erratic detection by the tree leaves or the light level
changes.
• H-POS,V-POS, H-SIZE and V-SIZE -
Adjust the size and position of the detection window.
• BLOCK DISP : ON enables to display the blocks for the detected area.
• MOTION OSD : ON enables to display a text message, MOVING !!!,
• SMART MOTION ZOOM : ON enables to Automatic Zoom IN/OUT when
motion is detected and also enables MOTION OSD to ON.
Area to be zoomed in by SMART MOTION ZOOM can be set at SPECIAL>
MOTION> SMART MOTION ZOOM. Adjusting
◀
,
▶
(Joystick) for ZOOM
TARGET varies the viewing angle to be zoomed when the motion occurs.
Set the video left and right and/or up and down by MIRROR/FLIP.