Eneo PXD-2080MIR C, User Manual

Page: 19 / 133

19
SPECIAL Factory Default Descriptions
CAM TITLE ON If set to ON, CAM TITLE is displayed on the screen.
(See CAM TITLE for detail)
MOTION OFF If set to ON, motion is displayed on the monitor by means of digital effect.
(See MOTION for settings)
PRIVACY OFF If set to ON, up to 8 privacy masks are displayed on the monitor by means of blocks. (See
PRIVACY for settings)
LANGUAGE ENG ENGLISH, GERMAN, FRENCH, ITALIAN, POLISH, SPANISH, CHINESE I, II, JAPANESE are
available.
When changing LANGUAGE, select language and press to load new fonts.
It takes about 4 seconds to load new language fonts.
PIXEL
COMP - The defect pixels on the image sensor can be compensated and remapped with this feature.
(See PIXEL COMP)
TV SYSTEM EU (50HZ) or
US (60HZ) Sets US (60HZ) for US HDTV standard or EU (50HZ) for EU HDTV standard.
CAM TITLE menu
To enter CAM TITLE menu, press ● at MAIN >SPECIAL>CAM TITLE>ON
Up to 15 characters from the character table can be input.
Use ▲,▼,③,③ to move cursor(Blink character is on the cursor position) in the character table.
Press ● to select and the selected character will be input and displayed on CAM TITLE input line.
To move the input position CAM TITLE input line, press ● on
To clear CAM TITLE input line, press ● on CLR on command line.
To set the location of CAM TITLE to be displayed on the video, press ● on POS on command line
and then menu disappears and CAM TITLE will be displayed on the video.
Use ▲,▼,③,③ to locate CAM TITLE at the proper position and press ● to fix.
Menu will appear again.
To finish CAM TITLE menu, press ● on RET on command line.