Eneo NLS-1401, Instruction Manual, Page: 7 / 12

7
4. The encoder’s Live View page appears in your browser.
3.2. Access from the internet
Access from the internet Once connected, the NLS-1401 is accessible on your
local network (LAN). To access the NLS-1401 from the Internet you must
configure your broadband router to allow incoming data traffic to the video
encoder. To do this, enable the NAT-traversal feature, which will attempt to
automatically configure the router to allow access to the video encoder. This is
enabled from Setup>System>Network>NAT.
For more information, please see NAT traversal (port mapping) for IPv4, on
page 55, the User’s Manual.
3.3 Setting the administrator password
To gain access to the product, the
password for the default administrator user
must be set. This is done in the “Admin
Password” dialog, which is displayed when
the NLS-1401 is accessed for the setup at
the first time. Enter your admin name and
password, set by the administrator.
Note: The default administrator username
and password is “admin”. If the password
is lost, the NLS-1401 must be reset to the
factory default settings. See page 10.