Eneo NLS-1401, Instruction Manual, Page: 5 / 12

5
NO Function Description
1
Power adaptor
connector
Connects the supplied power adapter or an external
power supply 12V DC or 24V AC, max. 5W.
2
Network
connector(PoE)
RJ-45 port compatible with 10/100Mbps, which have a
PoE function.
3 8-pin I/O terminal Connects RS485, alarm input and output.
4 Audio In/Out
Connects the port to the microphone and speaker, which
have an amplifier function.
5 Video In/Out Connects the video input and output.
2. Installation
Various connections can be made to the Encoder, these include:
Network cable (which can also power the camera if used with a PoE switch),
Composite video coax connection, separate power connection and an Alarm
input and output cable, and RS485 Telemetry cable
Network Connection
To communicate with the NLS-1401 camera it is necessary to connect a
standard RJ-45 cable to it. Generally a cross-over cable is used for direct
connection to PC, while a direct cable is used for connection to a hub / switch.
IP Assignment
When the NLS-1401 is first connected to the network it has no IP address. So, it
is necessary to allocate an IP address to the device use the “Smart Manager”
utility on the CD.
1. Connect the
NLS-1401
to the network and power up.
2. Start SmartManager utility ( All Programs>NT-Manager16>SmartManager),
the main window will be displayed, after a short while any network devices
connected to the network will be displayed in the list.
3. Select the
NLS-1401
on the list and click the right button of the mouse. You
can see the popup menu as below.