Eneo MPD-64A0003P0A, User Manual

Page: 15 / 28

EN
15
1-2. FOCUS
1-2-1. FOCUS MODE :
Selects FOCUS MODE to ZOOM PUSH, AUTO or MANUAL. If you set to AUTO
or MANUAL mode, Smart Motion Zoom function in ZOOM is disabled.
1-1-6. RATIO DISP : ON enables to display the zoom ratio on the bottom right corner.
OZx.x appears during the optical zoom and DZx.x will display by multiplying
the optical zoom ratio and the actual digital zoom ratio.
• ZOOM PUSH : Focusing is activated only when zoom in/out is working.
Focusing works steadily for sharp focusing on the object.
• AUTO : Focusing is always working.
• MANUAL: Focusing can only be adjusted by
▲
,
▼
of OSD control joystick or
the remote control via UTC.
Lens initialization is necessary during the installation or the regular operation
to align the position data with the mechanical positions whose lens elements
may move and deviate from its calibrated position by the shock or vibration,
for example, during the transportation. Lens initialization is automatically
executed at power up.
INITIAL starts the lens initialization when pressing the joystick straight down
for about 2 sec. It is strongly necessary to execute LENS INIT in cases below;
- At the final step for the installation.
- When focus becomes out of control by the shock or vibration.
1-2-2. LENS INIT :
FOCUS
FOCUS MODE
LENS INIT
RETURN
ZOOM PUSH
ON
FOCUS
FOCUS MODE
LENS INIT
RETURN
MANUAL
ON
Smart Zoom is not supported
when FOCUS mode Manual/AUTO is used
i Smart Zoom is not supported when FOCUS mode Manual/Auto is used.