45
6.1.5 Change the Application Setting
Please follow the steps below to change the application setting through the network if and as necessary.
• Change the Application Setting - FTP Application Setting (MJPEG mode only)
Please follow the steps below to change the FTP setting via the network if and as necessary to upload recording data
live.
. Click the
Application
button on the home page to enter the „FTP Application Setting” page (default).
. For storage setting, type in the required number of images you wish to set in the „Pre- Alarm Memory Buffer” and
the „Alarm Memory Buffer” respectively in their corresponding blank spaces.
3. Enter the „Upload Rate” you have chosen.
4. Click
Submit
after each of the above entries for their setting.
5. Click the
Home
button to return to the home page.
Description of function keys
Pre - Alarm Memory Buffer:
Fixes the desired number of images to prelude an alarm.
Alarm Memory Buffer:
Determines the selected length of the image buffer after an alarm.
Upload Rates:
Sets the upload speed rate.
