Eneo GLC-1601 Installation And Operating Manual Download Page 41

Page: 41 / 104

• Change the System Setting - Audio Mechanism

Please follow the steps below to change the Audio Mechanism through the network if necessary.

. Click the

Audio Mechanism

button on the left side of the „Date and Time” page to enter the „Audio Mechanism

Setting” page.

. Mark „Audio Mechanism” „ON” or „OFF”.
3. Click the

Submit

button to submit the new user’s setting.

4. Click the

Home

button to return to the home page.

NOTE: This setting is for turning the audio mechanism of the Camera on/off automatically.

The Live audio service is not provided in the MPEG4 mode via the Web browser.

Description of function keys

Audio Mechanism:

Select „ON” or „OFF” to activate or deactivate the function.

Summary of Contents for GLC-1601









































































































Search results

Summary of Contents for GLC-1601

Reviews:

Related manuals for GLC-1601

Brands by name

Popular brands

Eneo GLC-1601, Installation And Operating Manual

Search results

Summary of Contents for GLC-1601

Reviews:

Related manuals for GLC-1601

Brands by name

Popular brands