Eneo FNR-4016/500, User Manual

Page: 49 / 60

48
9.5.2 PPPoE Settings
9.5.3 DDNS Settings
Adopting DDNS function can solve the problems caused by dynamic IP.
9.5.4 NTP Settings
Adopting NTP function can enable client software to synchronize the time and data of the device regularly.
Select
Æ
Enable PPPoE by ticking , input the user name and
password, then save the changes and reboot the device to
make the parameters become effective.
If succeed to dial, the current IP address will be displayed in
the blank “DDNS IP”.
Click
Æ
Enable DDNS.
If the “IP Server IP” is selected as protocol, then input the
address where the IP server is running.
If the “Dyndns” is selected as protocol:
Server Name: Input the IP address of the server, such as
members.dyndns.org;
Domain: the domain name that user applied for the device,
such as test.dynlia.com;
User name, password and verify: the account information that
user registered on the Dyndns website.
If the “Peanut Hull” is selected as protocol:
Input the user name and password applied on the Peanut Hull
website to visit the device by the applied domain name.