Pag. 26
MNNAEKR_0408
[ID TEXTS 4]
[----------------------------]
[Cam Text ]
[ ]
[>1 Text O1 ]
[ 2 Text O2 ]
[ 3 Text O3 ]
[ 4 Text O4 ]
[ 5 Text O5 ]
[ ]
[INC.Previous DEC.Next ]
[ENTER.Modify SEQ.End ]
Identification text submenu
Each input video is identified by a text string with max. 28 characters. The
cursor > indicates the active text, which can be modified. Press
/
to
choose the text to be modified,
to make the change or
to return to the
main menu.
[CAMERA TEXT 1 4.1]
[----------------------------]
[Text O1# ]
[----------------------------]
[1.ABC 2.DEF 3.GHI ]
[4.JKL 5.MNO 6.PQRS ]
[7.TUV 8.WXYZ ]
[ ]
[ENTER.Blank CLEAR.Erase ]
[INC/DEC.Other characters ]
[ ]
[SEQ.End ]
Lovercase characters:
[1.abc 2.def 3.ghi ]
[4.jkl 5.mno 6.pqrs ]
[7.tuv 8.wxyz ]
Numerical/simbol characters:
[1.1O 2.29 3.3. ]
[4.4, 5.5- 6.6/ ]
[7.7: 8.8<> ]
Text modify submenu
The first line shows which camera’s text identification is in the process of being
modified. The next line shows the text inserted so far. The flashing # cursor
shows the insertion point for other characters, if desired.
The text insertion method is that commonly used for mobile phones. Pressing
the
key will select the letter ‘A’; if
is pressed again within one second
the letter ‘B’ will be selected, and pressing
again will select ‘C’. After one
second’s wait the choice will be accepted and the # cursor will move forward by
one position.
and
can be used to select the character sets: “upper case”, “lower
case”, “numeric/symbols”.
Other characters are selected in the same way: for example ‘S’ is obtained by
pressing the
key 4 times. The number ‘9’ is obtained by selecting the
“numeric/symbols” set and pressing
twice.
deletes the last character inserted and
adds a space to the inserted
text.
When insertion has been completed, press
to return to the previous menu.
[ALARM NO.1 5]
[----------------------------]
[ 1.Type: Normally Open ]
[ 2.Reset: Cont ]
[ 3.Relay activation: YES ]
[ 4.Buzzer activation: NO ]
[ 5.Acknowledge: 1,2,3,4 ]
[ 6.Action: CO4:MO2,R01:P03 ]
[ ]
[INC.Next Alarm ]
[DEC.Previous Alarm ]
[SEQ.End ]
Alarms submenu
The matrix is provided with an alarm contact for each input. For further details
see section 4.2 Alarms.
The alarm contact number being modified is shown on the first line; change the
number by pressing
and
.
Press
to select the alarm type (normally open, normally closed, not used).
Press
to enter the submenu for defining Reset. Press
and
to
enable/disable relay closure and for buzzer enabling when the alarm is active.
Press
to enter the submenu for defining alarm recognition.
Press
to define the action on alarm. Press
to return to the previous
menu.
[ALARM NO.1 RESET 5.2]
[----------------------------]
[ 1.Momentary: NO ]
[ 2.Keyboard : YES ]
[ 3.External : YES ]
[ ]
[ -.Time: After 2 seconds ]
[ CLEAR.< ENTER.> ]
[ ]
[INC.Next Alarm ]
[DEC.Previous Alarm ]
[SEQ.End ]
Reset Alarms submenu
Press
to define the alarm type (continuous or impulsive). Press
and
to enable/disable reset by keyboard or by external impulse.
Press
and
to enable and change reset time.
Press
/
to pass to definition of the next/previous alarm. Press
to
return to the previous menu.
