background image

eSATA External Storage 

 
 

 

Chapter 1 — Introduction 

 

 

FEATURES 

 

Your eSATA external storage device has a Serial ATA (SATA) interface.  It is easy to install in a cabinet 
along with a Digital Video Recorder (DVR) and its maximum of four SATA hard disk drives offers excellent 
space savings.  It has the following features: 

 

 

19-inch rack mount type 

 

SATA-to-SATA port multiplier solution 

 

Maximum of 3.0Gbps transfer rate (SATA II) 

 

Maximum of four hard disk drives 

 

Maximized space saving and capacity relative to cost 

 

Easy expandability creating a very large storage pool 

 

 

PACKAGE CONTENTS 

 

The package contains the following:

 

 

 

eSATA External Storage 

 

AC Power Cord 

 

eSATA Cable 

 

Operating Instructions (This document) 

 

SATA HDD Carrier and Screws 

 

NOTE: 

The SATA HDD carrier and screws are not provided separately if hard disk drives are already 

installed in the unit.

 

 

WARNING: ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD.  
MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE.  
DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET.  THE POWER CORD HAS 
A GROUNDING PIN.  IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN 
RECEPTACLE, DO NOT MODIFY THE PLUG.  DO NOT OVERLOAD THE CIRCUIT BY 
PLUGGING TOO MANY DEVICES IN TO ONE CIRCUIT.

 

 
 

SPECIFICATIONS 

 

Host Connectivity 

External eSATA port (DVR connection) 
Max. Transfer Speed (SATA II): 3.0Gbps, Cable Length: Max. 2.0m 

Disk Connectivity 

SATA Hard Disk Drive (Max. 4), 1.5Gbps or 3.0Gbps (Auto detection) 

Dimensions (W x H x D) 

19.06  x 1.73  x 17.72  (484mm x 44mm x 450mm) 

Unit Weight 

11.9 lbs. (5.4kg) (HDD not installed) 

Shipping Weight 

18.3 lbs. (8.3kg) (HDD not installed) 

Operating Temperature 

41°F to 113°F (5°C to 45°C) 

Operating Humidity 

20% to 70% (Non-condensing) 

Power 

115V ~ 230VAC, Max. 2A, 50/60Hz 

Approvals FCC, 

CE 

 

NOTE: 

Specifications are subject to change without notice.

 

Summary of Contents for DMR-104













Reviews: