11
EN
Micro-SD Card Insertion & Termination
The device which is connected at end of line, whether it is a dome camera or keyboard
controller, must have the cable for communication terminated by setting the appropriate
DIP switch. Without proper termination, there is potential for control signal errors. Total
length of the cable for communication should not exceed 1.2 km.
User can install and change Micro-SD card as shown in the following picture.
Open the cover.
Micro-SD Card Slot
Remove the screw.
To detach PTZ module from
external housing, please turn it
counterclockwise.
Install or change Micro-SD card.
Reset button
RS485 termination
switch
