DRAFT
DRAFT
DRAFT
DR
DRAFT
DRAFT
DRAFT DRAF
DRAFT DRAFT DRAFT DRA
FT
D
RAFT D
DRAFT
DRAFT
DRAFT DRAFT DRAFT
DRA
FT DRA
Double Repeater User Manual
Intelligent Reliable Power
1
© ENECSYS 2010. All rights reserved.
1. Introduction
This manual contains information specific to the installation of an Enecsys Double Repeater.
Although the installation is simple a basic knowledge of internet routers, wired or wireless may
be beneficial although not necessary. Installation of the Enecsys Double Repeater is a 'plug and
play'. Enecsys have designed the hardware to be a simple as possible for the installer and end-
user alike.
Your solar PV (photo-voltaic) installation, when combined with an Enecsys Micro-Inverter with its
in-built wireless antenna is able to communicate wirelessly with the Gateway. This allows for
comprehensive monitoring of the solar PV array, module-by-module.
Monitoring an array module by module enables the user to see energy generation at module
level. Monitoring also allows the end-user to see the performance of any module at any time of
the day.
An Enecsys Double Repeater acts as a bridge between the Micro-inverter and the Gateway in
situations where a sufficient communication link cannot be established.
For circumstances where it may be necessary to install an Enecsys Double Repeater,
See“When
to install an Enecsys Double Repeater” on page 5.
