DRAFT
DRAFT DRAFT
DR
DRAFT DRAFT
DR
AFT
DRAF
DRAFT DRAFT DRAFT DRA
FT
D
RAFT D
DRAFT DRAFT DRAFT
DRAFT DRA
FT DRAFT DRA
Double Repeater User Manual
Intelligent Reliable Power
12
© ENECSYS 2010. All rights reserved.
2.6 Installing the external antenna
When installing an external antenna always make sure that cable entry to building is
waterproofed.
Always ensure that the cable isn't arranged such that water or condensate can run down coaxial
cable and onto the repeater.
1. Ensure that you have enough coaxial cable to reach from the mounting point to the Enecsys
Double Repeater.
2. Secure the external antenna to the mounting rack of the solar array or other suitable struc-
ture using two self-tapping screws. Cable ties may also be used to hold the antenna in a
secure position.
3. Connect the co-ax cable the bottom of the external antenna and screw into place.
4. Feed the coaxial cable through the installed cabling conduit and into the loft space of the
building, use cable ties to hold the co-axial cable in place.
5. Connect the SMA connector (male) to the upper SMA connector (female) on right hand side
of the Enecsys Double Repeater, screw the connector into place in a clockwise direction.
6. Secure the external coaxial.
