Endurance ESB250.2, Owner'S Manual

Page: 6 / 37

P r e p a r a t i o n s
Z
CAUTION:
To set up this unit, you will need assistance.
Do not attempt assembly by yourself.
You must review and follow the instructions in this Owner’s Manual. If you do not assemble and use the
ESB250.2 according to these guidelines, you could void the Endurance warranty.
Required Tools
The basic tools that you must obtain before assem-
bling the ESB250.2 include but are not limited to:
m
Standard Wrench Set
m
Metric Wrench Set
m
Adjustable Wrench
m
Allen Set
m
Rubber Mallet
m
Silicone Spray Oil
Installation Requirements
Follow these installation requirements when assem-
bling the ESB250.2:
Set up the ESB250.2 on a solid, fl at surface.
A smooth, fl at surface under the machine helps keep
it level. A level machine has fewer malfunctions.
Provide ample space around the machine.
Open space around the machine allows for easier ac-
cess and a more comfortable workout.
Insert all bolts in the same direction.
For aesthetic purposes, insert all bolts in the same di-
rection unless specifi ed (in text or illustrations) to do
otherwise.
Leave room for adjustments.
Tighten fasteners such as bolts, nuts, and screws so
the unit is stable, but leave room for adjustments. Do
not fully tighten fasteners until instructed in the as-
sembly steps to do so.
Fill out and mail the warranty card.
To benefi t from the best and most comprehensible
warranty in the fi tness industry, completely fi ll out
and mail the warranty card enclosed with the unit.
CAUTION !
Obtain assistance! Do not attempt to assemble
the ESB250.2 by yourself. Review the Installa-
tion Requirements before proceeding with the
following steps.