Endura ENLC52HC, Operator'S Manual

Page: 20 / 28

15
www.uniquip.ca
B.Preventative Maintenance Procedures
Maintaining a regular cleaning and lubrication schedule as well as taking time to perform preventative maintenance
procedures will prolong the service life of the ENLC52HC. The following are guidelines to setting up a regular maintenance
routine for the lawn comber.
1.Cleaning the ENLC52HC
i.After each use, the lawn comber, in particular the flails and rotor assembly, should be cleaned and
washed of any dirt or debris that may be trapped in the unit.
ii.When using a power pressure washer to clean the unit, DO NOT USE ANY MACHINE RATED HIGHER
THAN 1000 PSI.
iii.Beware of damaging any warning decals and labels, as well as the drive belt, bearings and engine.
Limit direct spray on these objects to help prevent their wear and tear.
iv. For easier access to cleaning the lawn comber, the machine may be tipped on its engine
guard for NO MORE THAN 2 MINUTES. Engine damage may result from gasoline flowing into the
crankshaft due to prolonged tipping.
2.Lubrication Schedule
Regularly scheduled lubrication of the wheels, flails & rotor assembly, and linkage joints in the carriage is
essential to smooth performance and extended equipment life. The following schedule is a recommended guide
to lubricating your ENLC52HC. The schedule should be adjusted for various environmental conditions and
frequency of use.
Item Suggested
Lubricant
Every 20
hours
Every 60
hours
As
required
After each
pressure wash
Storage
Engine Refer to Owner’s
Manual for Engine
ü
Depth Adjustment Lever General Purpose
Spray Lubricant
ü ü
Wheels Lithium-based Grease
ü ü ü ü
Folding Handle
Attachment Kits
General Purpose
Spray Lubricant
ü ü ü ü
Flails & Rotor General Purpose
Spray Lubricant
ü ü ü
Linkage General Purpose
Spray Lubricant
ü ü ü ü
Zerks General Purpose
Spray Lubricant
ü ü ü
Maintenance Procedures cont’d ...
!
Technician should read and thoroughly understand all manuals pertai-
ning to the machine to be serviced. Do NOT proceed with any service and
maintenance activity until ALL questions and concerns have been addressed.
Please call Uniquip Canada at 1-888-332-4012 for technical support and
advice.
!
ALWAYS consult and verify that all local codes and bylaws are followed
before performing any service or maintenance procedures.