Repairs
Teqwave T
44
Hauser
12
Repairs
12.1
General information
Repair and modification concept
The Hauser repair and modification concept provides for the following:
• Spare parts are grouped into logical kits with the associated Installation Instructions.
• Repairs are carried out by Hauser Service or appropriately trained customers.
• A certified device can only be converted to another certified device version by End-
ress+Hauser Service or at the factory.
Notes for repair and modification
When repairing and modifying a measuring device, observe the following:
• Use original Hauser spare parts only.
• Carry out the repair according to the Installation Instructions (EA).
• Observe the applicable standards, national regulations, hazardous area documentation
(XA) and certificates.
• Document every repair and each modification and enter them into the W@M life cycle
management database.
12.2
Spare parts
W@M Device Viewer (www.endress.com/deviceviewer):
The Device Viewer contains a list of all the spare parts for the measuring device along with
the order code. In addition, spare parts can also be ordered here. If available, users can also
download the relevant Installation Instructions.
The serial number required for ordering the spare part is located on the nameplate.
12.3
Hauser services
Information about service and spare parts is available from the Hauser Sales
Center.
12.4
Return
The measuring device must be returned if it is in need of repair or a factory calibration, or if
the wrong measuring device has been delivered or ordered. As an ISO-certified company and
also due to legal regulations, Hauser is obliged to follow certain procedures when
handling any returned products that have been in contact with medium.
To ensure swift, safe and professional device returns, please refer to the information on the
Hauser website at www.services.endress.com/return-material.
Summary of Contents for Teqwave T
Page 54: ...www addresses endress com ...
