Endress+Hauser Teqwave T Operating Instructions Manual Download Page 12 | Manualshive

Page: 12 / 54

background image

Storage and transport

Teqwave T

12

Hauser

5

Storage and transport

5.1

Storage conditions

Observe the following notes for storage:

• Store in the original packaging to ensure protection from shock.

• Protect from direct sunlight to avoid unacceptably high surface temperatures.

• Store in a dry and dust-free place.

• Do not store outdoors.
Storage temperature

5.2

Transporting the product

• Transport the measuring device to the measuring point in the original packaging.

• Use the carrying case supplied to prevent the device from being switched on unintentio-

nally.

• Do not remove protection caps mounted on connection points.

• When shipping the measuring device, the battery may not be more than 30% charged.

• When shipping, comply with Special Regulation SV 188 (transportation of lithium batte-

ries).

5.3

Packaging disposal

All packaging materials are environmentally friendly and 100% recyclable: box in

accordance with European Packaging Directive 94/62EC.

«
...
10
11
12
13
14
...
»

Summary of Contents for Teqwave T























































Reviews:

No comments

Related manuals for Teqwave T

Brand: Daewoo Pages: 2

Goldmann AT 870

Brand: Haag-Streit Pages: 20

Brand: E-Mon Pages: 72

Brand: bentrup Pages: 9

Brand: Mic Pages: 2

Brand: Dynojet Pages: 88

Brand: VP instruments Pages: 15

DT4120 PS Series

Brand: Datcon Pages: 92

Brand: GTR Pages: 8

sound SMART RLT Sport

Brand: VCA Pages: 36

Brand: Vanguard Instruments Pages: 85

Brand: Reed Instruments Pages: 12

Brand: Fungilab Pages: 47

Thruline 4020 Series

Brand: Bird Electronic Pages: 59

Brand: WIKA Pages: 56

Brand: Vega Pages: 36

Brand: Labgear Pages: 2

Brand: Kimo Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands