Endress+Hauser SS2000XP, Operating Instruction

Page: 15 / 60

BA02183C SS500XP/SS2000XP Gas Analyzer
Hauser 1
–
11
Fuse specifications
Fuses are located on the electronics control board, as shown in Figure 1–6 and
Figure 1–7
.
If you need to replace a fuse, use only the same type and rating
of fuse as the original as listed in Table 1 - 1.
Table 1 - 1 Fuse specifications
DWG Ref.
Volt -
age
Description Rating
Figure 1–6 F1
120 VAC Miniature Fuse, 5 x 20 mm, Time Delay 250VAC/0.8A
240 VAC Miniature Fuse, 5 x 20 mm, Time Delay 250VAC/0.5A
Figure 1–7 F2 24 VDC Miniature Fuse, 5 x 20 mm, Time Delay 250VAC/1.6A