Endress+Hauser SOP600, Technical Information

Page: 5 / 16

Overfill Prevention System SOP600
Hauser 5
1
3
4
5
2
 2 Automated Overfill Prevention System (AOPS) - overview
1 Cabinet for Overfill Prevention System
2 Safety relay output
3 Sensor, High-High alarm
4 Sensor, High warning
5 Automatically disabled actuator
Input
Measured variable Level
Input signal
FTL8x (SIL3):
• Connectable point level switches: Liquiphant FailSafe FTL8x with FEL85 electronic insert
• Power supply for point level switch: Nivotester FailSafe FTL825
• Connecting cable between Nivotester and Liquiphant: twin-core, screening is not mandatory
– Max. length: 1 000 m (3 281 ft)
– For detailed information about the electrical connection of the device, see the documentation of
the Liquiphants →  12 used
FTL5x/7x (SIL2):
• Connectable point level switches
– Liquiphant M FTL50 (H), FTL51 (H), FTL51C with FEL57 electronic insert
– Liquiphant S FTL70/71 with FEL57 electronic insert
• Power supply for point level switch: Nivotester FTL325P
• Connecting cable between Nivotester and Liquiphant: twin-core, screening is not mandatory
– Max. length: 1 000 m (3 281 ft)
– For detailed information about the electrical connection of the device, see the documentation of
the Liquiphants →  12 used
Output
Output Signal Output signal only possible with AOPS.