Endress+Hauser Prosonic Flow 90, Operating Instructions Manual

Page: 33 / 114

Proline Prosonic Flow 90 3 Installation
Hauser 33
Panel mounting
1. Prepare the installation opening in the panel (Fig. 31).
2. Slide the housing through the front of the panel cutout.
3. Screw the fasteners to the wall-mount housing.
4. Screw the threaded rods into the brackets and tighten until the housing is firmly fixed to the
panel wall. Tighten the counter nuts. No further support is necessary.
A0001131
Fig. 31: Panel mounting (wall-mount housing)
Pipe mounting
Installation according to the instructions in Fig. 32.
"
Caution!
If a warm pipe is used for the installation, ensure that the housing temperature does not exceed the
max. permitted value of +60 °C.
A0001132
Fig. 32: Pipe mounting (wall-mount housing)
245
~1
10
+0.5 –
0.5
210
+0.5
– 0
.5
Ø
20...70
~155