Proline Prosonic Flow 93C FOUNDATION Fieldbus
Commissioning
Hauser
51
6.4
Quick Setup
In the case of measuring devices without a local display, the individual parameters and functions
must be configured via the operating program, e.g. FieldCare.
If the measuring device is equipped with a local display, all the important device parameters for
standard operation, as well as additional functions, can be configured quickly and easily by means
of the following Quick Setup menus.
6.4.1
Quick Setup "Commissioning"
a0008715-en
Fig. 29:
Quick Setup "Commissioning"
!
Note!
• The display returns to the function SETUP COMMISSIONING (1002) if you press the ESC key
combination during parameter interrogation.
• The "Commissioning" Quick Setup must be carried out before one of the Quick Setups explained
below is run.
+
+
+
E
E
0424
0425
0423
0402
0422
1002
B
2000
Esc
E
+
-
XXX.XXX.XX
HOME-POSITION
n
o
m
p
q
Unit
Volume Flow
Unit
Temperature
Unit
Viscosity
Unit
Length
Unit
Velocity
QS
Commission.
Language
Presetting
Quick Setup
System Units
Volume
Viscosity
Length
Velocity
Quit
Configure another unit?
NO
YES
Selection system units
Autom. configuration display?
Another quick setup?
NO
NO
Automatical parameterization
of the display
YES
Temperature
Deliver Settings
y
Selection pre-settings
Actual Settings
m
The "DELIVERY SETTINGS" option sets every selected unit to the factory setting.
The "ACTUAL SETTINGS" accepts the units you configured beforehand.
n
Only units not yet configured in the current Quick Setup are offered for selection in each cycle. The volume unit is
derived from the volume flow unit.
o
The "YES" option remains visible until all the units have been configured.
"NO" is the only option displayed when no further units are available.
p
The "automatic parameterization of the display" option contains the following basic settings/factory settings
YES
Main line = volume flow
Additional line = totalizer 1
Information line = operating/system condition
NO
The existing (selected) settings remain.
q
The execution of other Quick Setups is described in the following sections.
