Endress+Hauser Proline Promass Q 300, Manual

Page: 50 / 88

Proline Promass Q 300
50 Hauser
DN A
1)
B
1)
C D
2)
E
2)
F G H I K L
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
80 200 141 59 169 68 101 43.5 378 902 524
3)
100 200 141 59 169 68 101 68.9 404 1 059 655
3)
1) For version without local display: values - 16 mm
2) Depending on the cable gland used: values up to + 30 mm
3) Dependent on the respective process connection
Order code for "Housing", option L "Cast, stainless"
DN A B C D
1)
E F G H I K L
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
25 200 141 59 169 68 101 15.2 361.5 578.5 217
2)
50 200 141 59 169 68 101 28.0 382 790 408
2)
80 200 141 59 169 68 101 43.5 409 933 524
2)
100 200 141 59 169 68 101 68.9 435 1 090 655
2)
1) Depending on the cable gland used: values up to + 30 mm
2) Dependent on the respective process connection
Flange connections
Fixed flange connections EN 1092-1, ASME B16.5, JIS B2220
C
D
A
B E
L
A0015621
Length tolerance for dimension L in mm:
+1.5 / –2.0
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N): PN16
1.4404 (F316/F316L):
order code for "Process connection", option D1S
Flange with groove according to EN 1092-1 Form D (DIN 2512N): PN16
1.4404 (F316/F316L):
order code for "Process connection", option D5S
DN
[mm]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
L
[mm]
100 220 180 8 × Ø18 20 107.1 1 128
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 µm