Proline Promass I 100
Hauser
81
Concentration
Package
Description
Concentration
measurement and special
density
Calculation and outputting of fluid concentrations
Many applications use density as a key measured value for monitoring quality or
controlling processes. The device measures the density of the fluid as standard and
makes this value available to the control system.
The "Special Density" application package offers high-precision density
measurement over a wide density and temperature range particularly for
applications subject to varying process conditions.
With the help of the "Concentration Measurement" application package, the
measured density is used to calculate other process parameters:
• Temperature-compensated density (reference density).
• Percentage mass of the individual substances in a two-phase fluid.
(Concentration in %).
• Fluid concentration is output with special units (°Brix, °Baumé, °API, etc.) for
standard applications.
The measured values are output via the digital and analog outputs of the device.
Viscosity
Package
Description
Viscosity measurement
In-line and real-time viscosity measurement
Promass I with the "Viscosity" application package also measures the real-time
viscosity of the fluid directly in the process, in addition to measuring the mass
flow/volume flow/ temperature and density.
The following viscosity measurements are performed on liquids:
• Dynamic viscosity
• Kinematic viscosity
• Temperature-compensated viscosity (kinematic and dynamic) in relation to the
reference temperature
Viscosity measurement can be used for Newtonian and non-Newtonian
applications and supplies accurate measured data irrespective of the flow, even
under difficult conditions.
Accessories
Various accessories, which can be ordered with the device or subsequently from Hauser, are
available for the device. Detailed information on the order code in question is available from your
local Hauser sales center or on the product page of the Hauser website:
Device-specific accessories
For the sensor
Accessories
Description
Heating jacket
Is used to stabilize the temperature of the fluids in the sensor.
Water, water vapor and other non-corrosive liquids are permitted for use as fluids.
If using oil as a heating medium, please consult with Hauser.
For details, see Operating Instructions BA00099D
Communication-specific
accessories
Accessories
Description
Commubox FXA195
HART
For intrinsically safe HART communication with FieldCare via the USB interface.
For details, see "Technical Information" TI00404F
HART Loop Converter
HMX50
Is used to evaluate and convert dynamic HART process variables to analog current
signals or limit values.
For details, see "Technical Information" TI00429F and Operating Instructions
BA00371F
