Endress+Hauser Proline Promass F 200 HART, Operating Instructions Manual

Page: 63 / 158

Proline Promass F 200 HART Commissioning
Hauser 63
Assign frequency output Select the process variable for
the frequency output. • Off
• Mass flow
• Volume flow
• Corrected volume flow
• Density
• Reference density
• Temperature Off
Mass flow unit Select the unit for mass flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list Country-dependent:
• kg/h
• lb/min
Volume flow unit Select the unit for volume
flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list Country-dependent:
• l/h
• gal/min (us)
Corrected volume flow unit Select the unit for corrected
volume flow.
Result
The selected unit applies for:
– Outputs
– Low flow cut off
– Simulation process
variable
Unit choose list Country-dependent:
• Nl/h
• Scf/min
Density unit Select the unit for density.
Result
The selected unit applies for:
– Outputs
– Low value partial filled
pipe detection
– High value partial filled
pipe detection
– Simulation process
variable
– Density adjustment (in the
Expert menu)
Unit choose list Country-dependent
• kg/l
• lb/cf
Reference density unit Select the unit for reference
density.
Result
The selected unit applies for:
– Outputs
– Low value partial filled
pipe detection
– High value partial filled
pipe detection
– Simulation process
variable
– Fixed reference density
– Density adjustment (in the
Expert menu)
Unit choose list Country-dependent:
• kg/Nl
• lb/scf