Functions relevant to custody transfer
Commissioning Instructions for PTB gas approval Proline Promass 84
28
Hauser
7
Functions relevant to custody transfer
Information on all available functions can be found in the separate manual entitled "Description of
Device Functions", BA00110D Promass 84 HART or BA00130D Promass 84 Modbus RS485.
In addition to the names of all functions and their place in the function matrix, this manual gives a
precise explanation of their functionality, of selection and configuration options and of cross-
connections within the function matrix, from the perspective of onsite operation.
The following is a list of functions relevant to custody transfer only, accompanied by a brief
explanation:
7.1
Custody transfer
7.2
Meas. variables
System units
Configuration
Function name
No.
Description
Configuration
CUSTODY TRANSFER
Z000 Use this function to display whether the measuring
point is set to custody transfer mode.
Display: C.T. YES
PULSE OUTPUT 1
CUSTODY TRANSFER
Z001 Use this function to select pulse output 1 for
transferring the CT signal.
Options: YES
(if relevant to custody
transfer)
PULSE OUTPUT 2
CUSTODY TRANSFER *
Z002 Use this function to select pulse output 2 for
transferring the CT signal.
Options: YES
(if relevant to custody
transfer)
CURRENT OUTPUT 1
CUSTODY TRANSFER
Z003 Use this function to select current output 1 for
transferring the CT signal.
Options: YES
(if relevant to custody
transfer)
TOTALIZER 1
CUSTODY TRANSFER
Z006 Use this function to select totalizer 1 for transferring the
CT signal.
Options: YES
(if relevant to custody
transfer)
TOTALIZER 2
CUSTODY TRANSFER
Z007 Use this function to select totalizer 2 for transferring the
CT signal.
Options: YES
(if relevant to custody
transfer)
TOTALIZER 3
CUSTODY TRANSFER
Z008 Use this function to select totalizer 3 for transferring the
CT signal.
Options: YES
(if relevant to custody
transfer)
MODBUS CFG C.T. **
Z009 Use this function to select totalizer 3 for transferring the
CT signal.
Options: YES
(if relevant to custody
transfer)
* available only for Proline Promass 84 HART measuring device
** available only for Proline Promass 84 Modbus RS485 measuring device
Function name
No.
Description
Configuration
UNIT
MASS FLOW
0400 Use this function to select the desired unit.
Options:
e.g. kg/h
UNIT
MASS
0401 Use this function to select the desired unit.
Options:
e.g. kg
UNIT
VOLUME FLOW
0402 Use this function to select the desired unit.
Options:
e.g. l/h
UNIT
VOLUME
0403 Use this function to select the desired unit.
Options:
e.g. l
UNIT CORRECTED
VOLUME FLOW
0404 Use this function to select the desired unit.
Options:
e.g. Nl/h
UNIT
CORRECTED VOLUME
0405 Use this function to select the desired unit.
Options:
e.g. Nl
