Endress+Hauser Proline Promag W 400 HART, Operating Instructions Manual

Page: 87 / 198

Proline Promag W 400 HART Commissioning
Hauser 87
Active level →  87
Response time status input →  87
Parameter overview with brief description
Parameter Description Selection / User entry Factory setting
Assign status input Select function for the status input. • Off
• Reset totalizer 1
• Reset totalizer 2
• Reset totalizer 3
• Reset all totalizers
• Flow override Off
Active level Define input signal level at which the
assigned function is triggered. • High
• Low High
Response time status input Define the minimum amount of time the
input signal level must be present before the
selected function is triggered. 5 to 200 ms 50 ms