Commissioning
Proline Promag L 400 HART
80
Hauser
Sequence of the wizard
Volume flow
Assign freq.
Mass flow
Off
Conductivity
Volume flow
Assign pulse
Mass flow
Off
Volume flow
Assign curr.
Mass flow
Conductivity
Off
Mode output 3
Reverse flow*
Forward flow
Forward/Reverse
End of wizard
Display damping
Damping out. 2
Damping out. 1
Damping out. 3
Mode output 2
Mode output 1
Rev. flow comp.
A0017459-EN
å
28
"Output conditioning" wizard in the "Setup" menu
Reverse flow* = option only for pulse and frequency output
Parameter overview with brief description
Parameters
Description
Selection/
User entry
Factory setting
Display damping
Set the reaction time of the
local display to fluctuations in
the measured value caused
by process conditions.
0 to 999 s
0 s
Damping output 1-3
Set the reaction time of the
current output signal to
fluctuations in the measured
value caused by process
conditions.
0 to 999 s
1 s