Proline Fieldcheck
Device functions - general section
Hauser
45
9.3
Block BASIC INFORMATION
9.3.1
Group DEVICE DATA
9.3.2
Group READ IN PARAMETERS
Block
Group
Function group
Function
BASIC
INFORMATION
DEVICE DATA
DEVICE DATA
READ IN
PARAMETERS
READ IN
PARAMETERS
Function description
BASIC INFORMATION
DEVICE DATA
DEVICE DATA
Use this function to display the following information:
Display:
Measuring device type
Sensor
Diameter
Calibration factor
Serial number
Tag name
Function description
BASIC INFORMATION
READ IN PARAMETERS
READ IN PARAMETERS
Use this function to transfer the complete data record from the measuring device to
Fieldcheck if, for example, you have changed parameters in the connected measuring
device.
!
Note!
This function is not available for thermal measuring devices (t-mass 65).
Options:
START
CANCEL
