Endress+Hauser Proline Cubemass 300, Description Of Device Parameters

Page: 121 / 294

Proline Cubemass 300 Modbus RS485 Description of device parameters
Hauser 121
Response time
Navigation  Expert → Output → Curr.output 1 to n → Response time (0378–1 to n)
Prerequisite One of the following options is selected in the Assign curr. parameter (→  110):
• Mass flow
• Volume flow
• Correct.vol.flow
• Target mass flow
*
• Carrier mass fl.
*
• Density
• Ref.density
• Concentration
*
• Temperature
• Carr. pipe temp.
*
• Electronic temp.
• Osc. freq. 0
• Osc. ampl. 0
*
• Freq. fluct. 0
• Osc. damping 0
• Osc.damp.fluct 0
• Signal asymmetry
• Exc. current 0
Detailed description of the options Oscil. frequency, Oscil. amplitude, Oscil.
damping and Signal asymmetry : Value 1 display parameter (→  18)
One of the following options is selected in the Current span parameter (→  111):
• 4...20 mA NAMUR
• 4...20 mA US
• 4...20 mA
• 0...20 mA
Description Displays the response time. This specifies how quickly the current output reaches the
measured value change of 63 % of 100 % of the measured value change.
User interface Positive floating-point number
Additional information Description
The response time is made up of the time specified for the following dampings:
• Current output damping →  120
and
• Depending on the measured variable assigned to the output.
– Flow damping
or
– Density damping
or
– Temperature damping
* Visibility depends on order options or device settings