Flowmeter Proline 10 Modbus RS485
Electrical connection
Hauser
15
NOTICE
If the cable gland is incorrect, this compromises the sealing of the housing!
Damage to the device.
‣
Use a suitable cable gland corresponding to the degree of protection.
A0045442
1. Ground the device carefully and provide
potential equalization.
2. Connect protective earthing to the outer
ground terminals.
1,5 Nm (1.1 lbf ft)
3 mm
A0041094
3. Loosen the Allen key of the securing
clamp.
4. Unscrew the housing cover in the
counterclockwise direction.
A0041330
5. Press the tab of the display module
holder.
6. Remove the display module from the
display module holder.
