OUSAF46
Electrical connection
Hauser
15
6.4
Post-connection check
Device condition and specifications
Notes
Are the sensor, assembly and cable free from damage on the outside?
Visual inspection
Electrical connection
Notes
Does the supply voltage of the connected transmitter match the data on the
nameplate?
Visual inspection
Are the installed cables strain-relieved and not twisted?
Has the cable been routed without loops and cross-overs?
Check that it is firmly seated (by
pulling gently)
Are the signal cables connected correctly according to the connection diagram?
Are all cable entries mounted, tightened and leak-tight?
For lateral cable entries, make sure
the cables loop downwards to allow
water to drip off.
Are the PE distributor rails grounded (if present)?
Grounding at the point of
installation
Summary of Contents for OUSAF46
Page 35: ......
