Tankside Monitor NRF81
Incoming acceptance and product identification
Hauser
13
4
Incoming acceptance and product
identification
4.1
Incoming acceptance
Upon receipt of the goods check the following:
• Are the order codes on the delivery note and the product sticker identical?
• Are the goods undamaged?
• Do the nameplate data match the ordering information on the delivery note?
• If required (see nameplate): Are the Safety Instructions (XA) enclosed?
If one of these conditions is not satisfied, contact your Hauser Sales Center.
4.2
Product identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in
W@M Device Viewer
): All information about the measuring device is
displayed.
• Enter the serial number from the nameplates into the
Hauser Operations App
or scan the 2-D matrix code (QR code) on the nameplate with the
Hauser
Operations App
: all the information for the measuring device is displayed.
For an overview of the scope of the associated Technical Documentation, refer to the
following:
• The
W@M Device Viewer
: Enter the serial number from the nameplate
(
)
• The
Hauser Operations App
: Enter the serial number from the nameplate or
scan the 2-D matrix code (QR code) on the nameplate.
