background image

D

R

A

F

T

Micropilot FMR53, FMR54

80

V. 1, Rev. 7, 26-10-2012

Hauser

[Any] changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.

CRN approval

in preparation

Track record

FMR5x is the upgrade model of the corresponding FMR2xx series.

Other standards and
guidelines

• EN 60529

Degrees of protection by housing (IP code)

• EN 61010-1

Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.

• IEC/EN 61326

"Emission in accordance with Class A requirements". Electromagnetic compatibility (EMC requirements)

• NAMUR NE 21

Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.

• NAMUR NE 43

Standardization of the signal level for the breakdown information of digital transmitters with analog output
signal.

• NAMUR NE 53

Software of field devices and signal-processing devices with digital electronics

• NAMUR NE 107

Status classification as per NE107

• NAMUR NE 131

Requirements for field devices for standard applications

• IEC61508

Functional safety of electrical/electronic/programmable electronic safety-related systems

Summary of Contents for Micropilot FMR53





























































































Reviews: