Endress+Hauser Memocheck Sim CYP03D Operating Instructions Manual Download Page 14

Page: 14 / 52

Operation options

Memocheck Sim CYP03D

Hauser

Operation options

6.1

Overview

6.1.1

Display

A0026099-EN

 4

Display (e.g. simulation mode)

1
2
3
4
5
6

Menu path and/or device designation
Battery status
Simulated parameter
Assignment of soft keys, e.g. menu
Assignment of soft keys, e.g.  and 
Sim. main value

6.1.2

Key functions



ENTER key

• Switches on the device (press for at least 3 seconds)

• Calls up menu when in simulation mode

• Saves (confirms) data entered

• Selects a menu option

• Switches off the device (press for at least 3 seconds)

 or 

MINUS key or PLUS key

In setup mode, the MINUS and PLUS keys have the following

functions:

• Configuration of parameters and numerical values

• Navigation through menu
In simulation mode, the MINUS and PLUS keys have the following

functions:

"Run through" of sim. main values, with each values being changed by

the amount of the delta value



and



Escape function

Press MINUS and PLUS key simultaneously

• Pressing for a short time: takes you up one level in the menu.

• Pressing for a longer time in the main menu: takes you directly to

the simulation mode.

Summary of Contents for Memocheck Sim CYP03D





















































Search results

Summary of Contents for Memocheck Sim CYP03D

Reviews:

Related manuals for Memocheck Sim CYP03D

Brands by name

Popular brands

Endress+Hauser Memocheck Sim CYP03D, Operating Instructions Manual

Search results

Summary of Contents for Memocheck Sim CYP03D

Reviews:

Related manuals for Memocheck Sim CYP03D

Brands by name

Popular brands