6.3
Key functions
Quick calibration
Press the CAL key and enter the access code for quick calibration (11) to directly
access the calibration mode.
Setup
After pressing the E key and entering the setup code (22), the instrument switches to
the setup mode. The E key is further used for:
●
selecting the individual functions in setup mode
●
saving the data entered in setup mode
●
starting calibration
In measuring mode: Relay / wiper operation in “manual” mode.
In setup mode: Function group selection, setting of parameters and numerical values
(the setting speed increases when the key is held down).
Note:
Press both keys simultaneously to jump back
to the measuring mode.
Displays the limits set for the relays in “auto” mode,
switches between relay 1, relay 2 and wiper in “manual” mode.
Toggles the relays and the wiper between the “auto” and “manual” modes.
Operation
liquisys CUM 252
18
Hauser
