Endress+Hauser Liquiline To Go Ex CYM291, Operating Instructions Manual

Page: 36 / 64

36
pH Oxy Cond
Configuring the Data Logger
Prerequisite: The data logger is stopped (press ).
Measurement
Measured value is maintained
Logger: CONT blinks
t
Logger: START blinks
t
Logger: DEL blinks
t
Logger: SET blinks
Logger: Current logger type
blinks Select desired logger type using
st
:
DIFF, INT, DIFF+INT or SHOT.
Select the appropriate parameters using
st
and confirm each selection by press-
ing . When configuration is finished, CONT blinks. You can start the data logger
by selecting START or CONT (see page 37).
Data Logger