Conducal CLY421
Device description and operation
Hauser
9
The transmitter of the CLY421 is already configured. You just have to switch on the
transmitter. The transmitter displays the measured value after a few moments.
You need only switch on temperature compensation if the difference in temperature
between the calibration sensor and the process sensor is > 0.1 °C. This is described in
the "Comparison measurement" section.
3.2.3
Measuring arrangements
The calibration kit can be used for two measuring arrangements:
• Comparison measurement with a bypass
• Direct comparison measurement
a0017732-en
Fig. 8:
Comparison of comparison measurement with a bypass and direct comparison measurement
Summary of Contents for Conducal CLY421
Page 2: ...Endress Hauser...
