Accessories
Cerabar PMP51B Analog
46
Hauser
12
Accessories
12.1 Device-specific accessories
12.1.1 Mechanical accessories
• Mounting bracket for housing
• Mounting bracket for block & bleed valves
• Block&Bleed valves:
• Block&Bleed valves can be ordered as
enclosed
accessories (seal for mounting is
enclosed)
• Block&Bleed valves can be ordered as
mounted
accessories (mounted manifolds are
supplied with a documented leak test)
• Certificates (e.g. 3.1 material certificate and NACE) and tests (e.g. PMI and pressure
test) that are ordered with the device apply for the transmitter and the manifold
• During the operating life of the valves, it may be necessary to re-tighten the pack
• Water pocket pipes (PZW)
• Flushing rings
• Weather protection covers
For technical data (e.g. materials, dimensions or order numbers), see the accessory
document SD01553P.
12.1.2 Plug connectors
• Plug connector M12 90 deg, IP67 5m cable, union nut, Cu Sn/Ni
• Plug connector M12, IP67 union nut, Cu Sn/Ni
• Plug connector M12, 90 deg IP67 union nut, Cu Sn/Ni
The IP protection classes are only maintained if the dummy cap is used or the cable is
connected.
12.1.3 Weld-in accessory
For details, refer to TI00426F/00/EN "Weld-in adapters, process adapters and
flanges".
12.2 Device Viewer
All the spare parts for the device, along with the order code, are listed in the
Device Viewer
).
Summary of Contents for Cerabar PMP51B
Page 59: ......
