Safety
This unit is constructed and tested according to EN 61010-1 /
VDE 0411 Part 1 and left our works in perfect and safe condition. In order to
maintain this condition and operate safely the user must take note of the
following safety information and warnings contained in these instructions.
First check that the power supply to be used corresponds with that on the
unit legend plate.
This unit is supplied with a loose power cable including plug and socket
arrangement and is therefore classified to protection class I.
The power supply plug must only be connected to a socket with an earth
protection connection. This protection must be continued when using
extension leads. Any breakage of the earth conductor within or outside the
unit or loosening the earth connections can make the unit potentially
dangerous. Intentional disconnection or an open circuit of this earth
connection is not permissible.
There are no components in the unit that can be repaired by the user. All
repairs must be made by trained service personnel.
Removing covers or components, except where this can be done by hand,
must only be carried out by skilled personnel.
If it is assumed that the unit cannot be safely operated it must be
immediately taken out of operation and secured against unintentional use.
It can be assumed that the unit cannot be safely operated,
- if the unit is visibly damaged
- if the unit no longer operates
- if the unit has been in storage under adverse conditions for a longer
period of time
- after long transport under adverse conditions.
The manufacturer does not accept liability for any damage that has been
made due to the unit not having been used in accordance with these safety
instructions.
asp-station d 2
General notes
5
