Maintenance and care
qTOWER³ / qTOWER³ G
28
Installing color modules
The proper installation of the color modules is as follows:
}
Switch off the device.
}
Open the lid. Remove the four external screws on the inside of the lid.
}
Close the lid.
}
Remove the four outer screws on the rear of the device on the upper part
the hood is fastened with.
}
Pull the hood forward slightly.
}
Pull the hood forward for enough to access the rotating filter wheel for
the color modules.
}
Secure the hood in this position to prevent it from falling.
NOTICE! The hood can also be completely removed and set down in a safe
place.