Transport and storage
multi N/C 2100S (duo, pharma)
106
}
Remove the reagent bottle, the drip tray and other loose accessories. Wipe off the
hose(s) with a clean paper towel.
CAUTION! The hoses contain acid residue.
}
Remove the hoses from the connections on the halogen trap. Remove the halogen
trap from the clamps.
}
Pack open hose ends in protective bags and secure them in the analyzer, for example
with adhesive tape.
}
Open the left side wall:
– Unscrew the four attachment screws. The screws are captive and remain attached
to the wall.
– Remove the protective grounding. Set the side wall aside safely.
}
Remove the TIC condensate container and the condensation coil.
}
Remove the combustion tube.
}
Remove the combustion furnace.
}
Pack open hose ends inside the device in protective bags and secure them on the an-
alyzer with adhesive tape.
}
Close the left side wall of the analyzer:
– Attach the protective grounding to the side wall.
– First screw in the screws on the bottom side and then on the top side. Tighten the
screws in turns.
}
Position the top furnace cover and secure it with adhesive tape.
}
Close the front doors of the analyzer.
}
Carefully package the accessories. Ensure that the glass components are packed to
prevent breakage.
}
Package the analyzer and the accessories in the original packaging.
ü
The analyzer is securely packed for transport.
See also
2
9.1.2
Moving the device in the laboratory
CAUTION
Risk of injury during transport
Dropping the device poses a risk of injury and damage to the device.
¡
Proceed carefully when moving and transporting the device. Two persons are re-
quired to lift and carry the device.
¡
Grip the device firmly at the bottom with both hands and lift it simultaneously.
Observe the following when moving the device within the laboratory:
¡
Insufficiently secured components pose a risk of injury!
Before moving the device, remove all loose parts and disconnect all connections
from the device.
¡
For safety reasons, two persons are required to transport the device, one person on
each side of the device.
