7
7
ATTACHMENT TO
CLUBSPORT STEERING
WHEEL FORMULA V2
5
Loosen the two bolts highlighted in red using the
2 mm Allen key (J).
Remove the rear cover.
Disconnect the standard shifter paddle cables.
Loosen the mounting bolts marked in red using a 4 mm
Allen key (I) to detach the standard paddle modules.
Loosen the shifter paddle bolts marked in red using a
2.5 mm Allen key (not included) for clearance to the
mounting bolts of the standard paddle modules.
Insert the cables of the ClubSport Magnetic
Paddle Module before attaching the modules.
Once the cables are completely pushed through,
attach the modules using the included M5x12 mm
bolts (H) and tighten them.
NOTE:
Store the mounting bolts with the standard shifter
paddles for later use.
NOTE:
Carefully pull on the plastic connectors and not
the cables of the standard shifter paddle modules.
1
2
3
4
5
6
Summary of Contents for FANATEC ClubSport Magnetic Paddle Module
Page 1: ...Manual EN www fanatec com...
