5.
Torque Adjustment
CAUTION
l
Rotating the shaft or the parts that are installed on the shaft in the direction of the
arrow generates torque.
When you release the rotated shaft or parts, they may quickly rotate in the reverse
direction and cause an injury.
l
A sudden release of the spring may damage the spring.
Do not release the spring when there is no load on it.
l
If you wind the spring more than the maximum number of turns, a mechanism to
prevent excess winding works and makes clicking sounds.
Do not operate the device in such a way that the mechanism to prevent excess
winding is constantly activated.
Perform the initial turn and other settings as indicated in the graphs below.
[Torque and number of turns]
Model: ZS-02
Model: ZS-05
㻌
㻌
Model: ZS-08, ZW-16
Model: ZS-16, ZW-32
Model: ZS-24, ZW-48
ZS-08
Torque (N
䏙
m)
ZW-16
Torque (N
䏙
m)
Number of turns (times)
ZS-16
Torque (N
䏙
m)
ZW-32
Torque (N
䏙
m)
ZS-24
Torque (N
䏙
m)
ZW-48
Torque (N
䏙
m)
Number of turns (times)
Number of turns (times)
Due to the characteristics of the product,
the spring may not fully return, even
without any torque. This makes the product
inoperable within the ranges that are
indicated by the broken lines in the graphs.
Allow a little leeway for the maximum turns.
Torque (N
䏙
m)
Torque (N
䏙
m)
Number of turns (times)
Number of turns (times)
Copied
digital
data
Copied
digital
data
Model: ZS 05
Copied
digital
data
Copied
digital
data
from http://www.endo-kogyo.co.jp/
from http://www.endo-kogyo.co.jp/
from http://www.endo-kogyo.co.jp/
Perform the initial turn and other settings as indicated in the graphs below.
Perform the initial turn and other settings as indicated in the graphs below.
Number of turns (times)
Number of turns (times)
