8
GB
Instruction manual
Usage preparations:
A Push the locking device left to separate the water tank (6) from the wastewater tank (7).
B Swivel the emptying nozzle (9) up and add a sanitation supplement such as ENSAN GREEN
or ENSAN BLUE for the waste tank. Observe the dosage instructions on the bottle. Fill up
with 2 litres of water.
C Screw the emptying nozzle cap (10) onto the emptying nozzle (9). Turn the emptying nozzle
back to its normal position. Put the two parts of the toilet back together by pushing the
water tank onto the wastewater tank.
D Fill the water tank (6) with freshwater (max. 16 litres).
Add Enders ENSAN RINSE. Observe the dosage instructions on the bottle.
Usage:
E With the toilet seat (1) down and the lid (2) closed, open and close the waste slider seal (8)
once. This allows excess pressure to escape.
F Using the pump (5) rinse the toilet with freshwater. Open the slider seal (8) to let the
contents of the toilet fall into the waste tank (7). Then close the slider seal.
The level indicator (13) shows you when the wastewater tank needs to be emptied (green =
empty / red = full).
G Disconnect the toilet and empty the wastewater tank (7) at an approved disposal site or in
a normal toilet.
H Empty the wastewater tank via the emptying nozzle (9). Whilst emptying, press the
ventilation button (11) to prevent splashing (only press when the emptying nozzle is
pointing
downwards).
Do not use normal toilet paper as this can block the emptying nozzle. Instead, use Enders
“ENSAN WC Paper”.
Use in winter:
Only use in a heated area and protect from frost!
1. Removable toilet seat
2. Removable lid
3. Cap for water tank
4. Toilet bowl
5. Pump
6. Water tank (max. volume 16 litres)
7. Wastewater tank (max. volume 19 litres)
8. Slider seal
9. Swivelling emptying nozzle
10. Cap for emptying nozzle
11. Ventilation button
12. Slider
13. Wastewater tank level indicator
14. Ventilation
15. Release lever
16. Transport wheel
