30
GB
4.
START UP AND USE
CAUTION: When starting and stopping the device can be slight explosion at the burner.
This is not a failure of the Product and is not cause for alarm. Always keep a safe dis-
tance to the burner.
1. Open the regulator valve.
2. Press
the
regulator
button
(F)
until
the
small
flam
symbol
appears
and
at
the
same
time
continuously press the piezo-ignition button (G). After successful ignition, keep the regulator
button pressed for another 10 seconds. This brings the burner up to the necessary operating
temperature.
3. In the rare case that the heater does not ignite after the piezo-ignition button has been pressed
4 or 5 times, repeat the procedure after 2 minutes.
NOTE:
It
is
possible
to
ignite
the
device
using
other
primers
(matches,
fi e
sticks)
which
are
igni-
ted through the burner base openings.
5.
TURNING OFF
1. To switch of the device, close the regulator valve.
!
i
(
G)
(
F)
