Ender-3 S1 FAQ
Issue about installation
1
How long does it take to assemble the
machine?
Here is our suggestion for you problem:
Ender-3 s1 product is 96% pre-assembled.
Generally, the printer can be assembled in 5-20 minutes.
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
2
Where is the consumables rack mounted
to?
Here is our suggestion for you problem:
The consumables rack is fixed to the top of the gantry.
It is placed vertically on top and secured with screws.
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
3
What about the nozzle kit shaking
after the machine is installed?
Here is our suggestion for you problem:
Please tighten the eccentric nut on the back plate of the nozzle kit.
After commissioning you can test by sliding it from side to side.
Tight is stuck, loose is shaky
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
4
Why is the platform a little shaky
after the machine is installed?
Here is our suggestion for you problem:
Please adjust the eccentric nut at the V-wheel of the hot bed.
After commissioning you can test by sliding it
Tight is stuck, loose is shaky
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
5
What about the Z-axis movement lag
after the machine is installed?
Here is our suggestion for you problem:
Once the screw is installed, the screw nut needs to be adjusted
The axis of movement up and down needs to be the same to maintain a smooth movement.
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
