background image

WARRANTY STATEMENT

Endeavour Tools guarantees this unit against defects in material and workmanship for a period of 

six (6) months from the date of purchase.  This warranty excludes consumable items in the kit.

A. 

  Endeavour Tools warrants the quality of these goods against defects in material and workmanship only.

B.

  Defective goods shall only be replaced, repaired or purchase price refunded if:

        a.    The customer notifies Endeavour Tools by providing a full report describing the defect in writing

               within 7 days of the discovery of the defect; and

        b.    The notification above provided to Endeavour Tools is prior to the expiry of the warranty period;

        c.     The customer forwards the defective goods together with proof of purchase from Endeavour Tools or 

                its authorized distributor at their expense, within 14 days of any request by Endeavour Tools to do so;

        d.    The goods since the date of delivery to the customer have been properly maintained, stored and 

                housed and the goods have not been abused or modified or the case opened; and the use of a 

                defective material.

C.

  Endeavour Tools may replace or repair the defective good (or part thereof) or refund the purchase 

         price of the defective good at its option.

D.

  Endeavour Tools shall not be responsible for any loss or damage arising from or in any way connected

         with the use of the goods.

E.

  To the maximum extent permitted by law, a claim in respect to a defective good shall not be

         permitted in the event that the goods have not been installed, used, maintained, or housed in a proper

         and workmanlike manner or in accordance with the usual standards or manufacturers specifications 

         or instructions or if the goods have been modified, repaired or altered by any person apart from 

         Endeavour Tools.

Notwithstanding our warranty terms above, our goods come with guarantees that cannot be excluded under the Australian 

Consumer Law.  You are entitled to a replacement or refund for a major failure and for compensation for any other 

reasonably foreseeable loss or damage.  You are also entitled to have the goods repaired or replaced if the goods fail to be of 

acceptable quality and the failure does not amount to a major failure.
The benefits under our warranty are in addition to other right and remedies under a law in relation to the goods.

© Endeavour Tools Pty Ltd 1015    

 

 

 

 

  

E&OE

7

Summary of Contents for ET6795









Reviews: