ENDEAVOUR ET2146, Operating Instructions Manual

Page: 8 / 20

8
Operating Instruction for Sound Level Meter
6.Button & Functions
Backlight Button 6-1.
• Turn the backlight On/Off.
• Datalogger Response setting:
1.Press the
Button continuously until “ Int ” symbol appears after the meter turn on. Backlight
2.Press the Button to set up the data memory response. LEVEL
3.Then press the Button to keep the setting. HOLD
MAX/MIN Button 6-2.
• Maximum and Minimum hold Press the MAX/MIN Button for one time to enter MAX/MIN measurement, “ MAX ”
will appear on LCD, maximum sound level will be captured and held until higher sound level is captured.
• Press the
MAX/MIN Button again, “ MIN ” will appear on LCD and minimum sound level will be captured and held
until new lower sound level is captured.
• Press the
MAX/MIN Button one more time to exit MAX/MIN measurement.
REC Button 6-3.
Datalogger Function 6-3-1.
• Press the REC Button after it power on, the display will show “ REC ” to start Data Recording.
• Press the REC Button again to exit the record.
Note: In order to avoid data error, please don’t power it off under REC condition, when the REC function is deleted
then it can power off.
Adjusting Datalogger Response 6-3-2.
• Press the Button continuously before power it on, then press the Button, it will be displayed Backlight Power
as following.
• Press the
LEVEL Button to adjust memory time, press the HOLD Button to hold the setup.