20
2.3.11 DIP Switch
System Setting Mode
: In this mode, the HMI will start a built-in system setting interface, where
you can set parameters such as date, startup interface, brightness and buzzer.
Touch Screen Calibrate Mode
: Used to calibrate the touch screen.
Firmware Update and Basic Parameter Setting Mode
: This mode is for senior user to update
the system, if you are stranger, please consult supporter.
Application (Online Operation) Mode
: This is the normal working mode of EOP5
–057 series.
The HMI will start from the startup window of the project downloaded.
SW1 SW2 Working Mode
ON
ON System Setting Mode
OFF ON Touch Screen Calibrate Mode
ON
OFF Firmware Update and Basic Parameter Setting Mode
OFF OFF Application (Online Operation) Mode
